Sunday, November 15, 2015

From Wool to Wheel

There is alot more that goes into the making of yarn than most people realize.  It's easy to think that it isn't that involved since you can buy a decent skein of yarn at walmart for just a few dollars.  The catch for that yarn is that it is machine processed by the ton.  While I don't think there is anything wrong with machine processed yarn (I used store bought yarn for years!),  I think it leaves out alot of the creative process that goes along with making something out of fiber.

When you are making something from raw fiber it really helps to have in mind what you want the final product to be.  Do you want something thick or thin, soft or rough, durable or dainty?  Then you have to think about the color.  Do you want to keep it natural or dye it some outrageous color?  Do you care if your yarn is lumpy, or does it have to be smooth and even.  All of these things depend on what it is you plan to make.  For example, if I was going to make a rug, I wouldn't really mind if the yarn was scratchy because it will never be up against my skin.  I also wouldn't care if the yarn was a little lumpy and uneven for a rug since I would most likely be weaving it and that would add a little texture to the overall design.  However, if I was going to make a hat or a scarf I would want something soft and even so it feels nice and fits well.

Here is my step by step process of taking my fiber from a raw material and making into something that I could make a hat with.

Step one:  Clean the fiber.  Not all fiber needs to be cleaned, but most will have some vegetable matter in it if it came off an animal that lives in a pasture and doesn't wear a coat.  Wool from a sheep will also feel greasy because of the lanolin in contains which is produced by the sheep to help waterproof their coat and keep them better insulated in bad weather.  Some people prefer to not wash the lanolin out of their wool because it makes it easier to spin.  Other animals like alpacas don't produce any lanolin, but roll in a lot of dust which makes their fiber quite dirty.  Washing before you spin the fiber generally makes it a little easier to work with.

Step two:  Card or Comb the fiber.  In order to prepare the fiber for spinning it helps to line all the fibers up so that they can be easily drafted.  This is accomplished using a carding brush or comb.  There are plenty of how to videos on you tube that show this step of the process.


Step three:  Spin the fiber.  Spinning can be accomplished using a drop spindle or a spinning wheel.  Spinning creates a twist in the fiber that allows microscopic ridges in the fiber to catch on each other and hold themselves together.  This is what gives the fiber strength and allows it to be drawn out into a long continuous thread known as a single.


Step four: Ply the singles together.  Plying is how yarn is made.  When plying, the spinning wheel is spun in the opposite direction that the singles are spun in. This allows the singles to twist back on each other and adds bulk and strength to the yarn.  You can ply together two singles to make two ply, or three singles to make three ply.
Plying two singles together

Step five: Crochet or knit the yarn into a finished product.  The amount of yarn you have to work with is the only limiting factor in this step.  Luckily once you know how to spin, you will always be able to make more yarn!

Wednesday, November 11, 2015

Garden Expansion

Until today, the only bed in the garden that has been prepared was the garlic bed.  I had hoped to have at least half of the garden beds turned over before the weather turned too cold.  In the last week we have had a bit of a cold snap.  Nights have gotten well below freezing in the last week, though day time temps were mild in the 50's.  We did have a fair amount of rain a couple nights ago as well.  Today conditions seemed favorable for a little more soil work, and I hope that holds true for tomorrow as well.  The ground isn't frozen yet, but if we have more nights below 20 I'm sure it won't be long before it is.

I started by getting a few more pieces of rebar to mark the corners of the beds.  I believe this bed is going to be used for spring potatoes so I will probably set up a hoop house over it to help them get an early start.  I have limited experience with season extenders, but I have found that hoophouses do a really good job of protecting fragile plants during the uncertain seasons of spring and fall.  The hoophouses I make are what I call the poor man's hoop house.  I can make one for about $30.  I use six pieces of rebar, three 1/2inch PVC plastic pipes, and a 25 x 10 ft clear painters tarp.  I find these items are the perfect size to cover my typical 3 x 10 ft beds.  I generally use large rocks or straw bales to hold down the edges of the plastic.


After I outlined the bed with twine, I began the tedious process of turning the soil.  Not surprisingly, this bed was also full of good sized stones which made hand digging with the shovel a great workout.
When I was done, I leveled the bed with the flat rake, then spread two bags of mushroom compost over the bed.  One final turning of the soil with the shovel and a new bed is now ready for planting in spring.  I covered this bed with straw to help reduce soil and moisture loss over the winter as well as to add organic matter to the bed.  Hopefully the extra insulation of the straw will help make the soil soft and workable in the early spring.


The third bed that I turned over was just as tedious as the first two.  I will be happy next year that I won't have to do rock removal before planting!  A friend of mine also generously donated a large back of leaves from their yard.  I dumped a three inch layer over this bed, then covered that with two more bags of mushroom compost.  

Finally I covered the whole thing with straw.  This is probably going to be one of the better producing beds next year if I had to guess.  Gotta love free leaves!

Monday, November 9, 2015

Indoor Salad Box

One of the worst things about winter is not being able to garden.  It is a long four months of nothing to do but dream of spring for many of us.  Fortunately it doesn't have to be that way.  I have started an experiment to see how long I can grow fresh salad for myself indoors.  I decided that my grow lights that I use to start seeds in the spring can be put to good use through the winter as well.  I also had a couple of small rubbermaid bins that I converted into indoor garden space by drilling holes in the bottom and filling them with potting soil.  Turns out that they are a good depth for a small lettuce and carrot patch.


This is a box that I started a couple of months ago.  There are eight romaine lettuce plants and two rows of carrots down the middle of this box.  I have been harvesting the lettuce one leaf at a time for a couple of weeks now and can cut leaves two to three times a week for a salad of unparalleled freshness.  The carrots still have a ways to go before I can pick them.  I hope to start a second box in a month or so to help extend my salad harvest.  I have also started a handful of carrot seeds in a couple of old paper milk cartons.  I hope to be eating fresh carrots and lettuce from these boxes all winter long.  


The best part of this whole experiment is that I will be getting fresh salad on a regular basis and it cost me next to nothing.  The only things I paid for was the potting soil and the packets of seed, which probably cost less than one salad at a nice restaurant.  Not too bad!  Not to mention that I upcycled the rubbermaid bin and reduced some garbage by reusing the milk cartons.  A win win if you ask me!

Sunday, November 8, 2015

The Product of a Late Summer Project: Wine

Shortly after I moved to the mountains I discovered the abundance of the local farmer's market.  I stocked up on peaches for canning, tomatoes, peppers and garlic for salsa and ate my fill of fresh fruits and veggies.  Another thing I stocked up on was fresh plums.  I bought several pounds of a variety of locally grown plums and took them home to begin the process of making them into wine.  The recipe that I follow can be found on Jack Keller's Wine making page: (winemaking.jackkeller.net/reques12.asp)  I use the second recipe on the page to make a sweet wine.

I make wine in small batches only using a one gallon glass jug for the main fermentation.  One gallon will generally give me five bottles of wine, though I used two gallons for this recipe since I had a little extra juice when all was said and done.  I believe I started the wine some time in early September and let it ferment for a month before I added the final round of sugar and racked it.  There it sat for another full month to allow it to finish fermenting completely and to become clear.

Today was the day I bottled the final product.  I love the color of this wine!  The plums I used had both red and yellow flesh, but the final color was a beautiful mixture of both.  
Seven bottles were the final total with only a tiny bit left over for tasting.  It was very light and sweet and will only get better with age.  I can't wait to open one of these bottles in a few months!

Friday, November 6, 2015

Getting Garlic in the Ground

When I think of planting season I generally think of spring, as would most people.  As I learn more about gardening, I have learned that there are some exceptions to that rule.  One of them being that garlic does best when planted in the fall.  Garlic is a bulb and like most early spring bulbs, they must be planted before the ground freezes for the winter.  Once they are in the ground, they can go about the important business of building up their root system which comes in handy when it's time to send up shoots in early spring.

Since I am breaking ground on a new garden this fall it made the most sense to start with the bed I was going to plant garlic in.  In the beginning it looked like this:

This is where the garden is going to be located.  Pretty much a blank slate.  I know that it seems a little close to that pine tree, but I think in the summer (which gets fairly hot here)  the plants will appreciate a little afternoon shade.  The area that the garlic bed is going to fill is in the middle of the whole garden. 

The first task was to mark off the area that was going to be the bed.  For this I just used a few pieces of rebar and some twine.  I did my best to make the bed three feet by ten feet.  I have found in the past that this bed size is ideal for making hoop houses over with pvc pipe and painter's plastic.

The next step was to add compost to the soil.
For this bed I settled on two bags of mushroom compost.  I had planned on using horse manure from some friends of mine, but right now I don't have a good way to transport as much as I would need to use.  

With the compost spread evenly over the bed, I then proceded to turn the bed over using my handy dandy shovel.  This was the most labor intensive part of the whole thing mostly because of all the river rock throughout the bed.  I had a hard time digging as deep as I would have liked, but I was able to remove a good deal of rock so the soil was in pretty good shape by the time I was done. 

Here it is all blended nicely and raked smooth for planting.  

The next step was spacing the garlic cloves in preparation for planting.  I did a little homework on what the ideal spacing is for garlic and there is a bit of a range so I took the middle ground.  I planted my cloves about six inches apart in a grid.
This is why I like to use a wide bed method to my garden.  I can fit many more plants in a bed like this than I could planting them all in their own rows with walking space inbetween.  I think the total number of cloves I planted was somewhere around 90.  About half of them came from garlic that I had saved from this summer's harvest back in Illinois.  I made sure to save the biggest and best heads of garlic for this purpose.  The other half is made up of a couple of varieties that I bought from the local farmers market.  I think one is a red skinned soft neck variety and the other is some type of hardneck garlic.

Once I had the spacing all plotted out, I went through and pushed each clove into the ground a couple of inches (making sure that the pointed side was facing up).
Once all the cloves were nestled into the bed I gently leveled the soil once again making sure to fill in all the holes.  Then I mulched the whole bed with some straw.  The straw will help protect the garlic from the harsh winter weather and hopefully keep the frost from heaving them out of the ground.

At some point I want to get a small hoop house up over this bed to help protect the young garlic, though it would probably be just fine without it. For right now it is probably just fine to leave it uncovered so the bed can absorb any rain that comes in the next few weeks.  I may add another layer of mulch when the weather starts to get cold in the next few weeks, but for now I am considering this bed to be complete.  









Thursday, November 5, 2015

Crocheting with a Passion

So as you know I have been crocheting for many years now and I think it will always be my favorite method for working with yarn.  I have crocheted a variety of items from blankets to hats and scarves.  I have even made a few cute shirts and shawls as well.  My go to item is usually hats because my goal with them is ultimately to sell them.  It has never been too difficult to find someone willing to pay for one of my hats and I will even make them custom colors if asked.

My latest endeavor in the hat making department has been to make the yarn before I make the hat.  I have discovered that I enjoy spinning nearly as much as I enjoy crocheting (now that I can spin a even thickness yarn).  Spinning adds a whole new dimension to crocheting.  Now I can mix any colors I want in a single length of yarn which allows me to make thinner hats that are just as colorful (if not more so) than what I was making before.  I also like the fact that I can work with a wider variety of fibers than what I could find at the store which opens the door to all different types of textures for my work.

I generally like to use the softest materials I can find which usually means that I use alot of alpaca fiber in my work, but I am slowly discovering the wonderful world of fiber blends.  One of my new favorite blends to work with is a merino/ tussah mix which is basically sheep's wool blended with silk.  It spins up unbelievably soft and is easy to keep even when spinning, not to mention the shine that is present in the final product.  I like these blends because they also seem less itchy than the straight wool that most people seem bothered by.  I also like the wool or alpaca blends because they are so much warmer than most manufactured yarns.

I think in this day and age the natural theme in my products is a big selling point as people are starting to pull away from artificial materials in their lives.  I am learning more about using natural dyes and hope to become proficient in dying my own fiber using natural methods as well.  It is amazing what colors you can find in nature, though undyed fiber is beautiful in it's own right.


Sunday, November 1, 2015

Garden Tools

My tool list for gardening is fairly short and simple and to the point.  I have a shovel, a flat rake, a potato fork, a trowel and gloves.  It is my intention to live simply on the earth so I do not plan on using any type of power tools in my garden, which means no tiller.  I have read that tilling actually forms a compact layer deep in the soil that can actually be detrimental to plant growth, so I want to avoid that if at all possible.  It may mean more physical labor in the beginning, but I think the benefits are worth it.

I do plan on trying to use a minimal or no till method of gardening, so after the first year or two I may not have much need for a shovel either.  In the creation of the garden, however, the shovel is essential.  I am using it to turn over the soil and add compost, which will aerate the soil and make the soil loose and fluffy which helps plants to push their roots deep into the earth to absorb nutrients.  I am also using the shovel to remove rocks.  My yard seems to have an abundance of smooth river rock just 3-6 inches beneath the surface and removing those will be quite the chore.  The shovel works fairly well for prying them free from their shallow prisons and working the soil in the following years should be much easier.

The flat rake is used to level the beds and make a smooth surface for sowing seeds.  The tines of the rake also come in handy when trying to plant small seeds in straight rows.  Just drag the rake down the bed and suddenly you have twelve evenly spaced rows for planting.  Flip the rake over and drag it over the seeds and everything is covered nicely in one swipe.

The potato fork is mostly self explanatory.  It is used to lift potatoes from the soil, but it is also useful for digging onions, garlic, and carrots.  It could also be used to turn the soil and dig out plants that are done for the season.

A trowel comes in handy for all kinds of general planting.  My trowel has measurements marked on the side of the blade so it helps to make sure I am planting seeds at the correct depth.  I also use it when I am transplanting seedlings or digging out deep rooted weeds.

All in all, my garden tool collection is rather modest.  In the future I may add in a hoe to help with weeding, but for now I think I can live without it.  One of the most important tools I will be using is the hose.  I do plan on working out some form of drip irrigation for my garden, but I haven't quite decided if I am going to use a soaker hose, or fashion something from PVC pipe or old garden hoses.  I need to do a little more research and maybe a little experimenting before I settle on my irrigation scheme.